گروه صنعتی پارسه سازه

گروه صنعتی پارسه سازه

ساخت ، نصب و اجرای سوله ، اسکلت فلزی و فنداسیون
گروه صنعتی پارسه سازه

گروه صنعتی پارسه سازه

ساخت ، نصب و اجرای سوله ، اسکلت فلزی و فنداسیون

Pressure Vessels

Generally, a pressure vessel is a storage tank or vessel that has been designed to operate at pressures above 15 p.s.i.g. Recent inspections of pressure vessels have shown that there are a considerable number of cracked and damaged vessels in workplaces. Cracked and damaged vessels can result in leakage or rupture failures. Potential health and safety hazards of leaking vessels include poisonings, suffocations, fires, and explosion hazards. Rupture failures can be much more catastrophic and can cause considerable damage to life and property. The safe design, installation, operation, and maintenance of pressure vessels in accordance with the appropriate codes and standards are essential to worker safety and health.

Pressure vessel hazards are addressed in specific standards for the general industry, shipyard employment, and the construction industry.

Standards

This section highlights OSHA standards and national consensus standards related to pressure vessels.

OSHA

Note: Twenty-five states, Puerto Rico and the Virgin Islands have OSHA-approved State Plans and have adopted their own standards and enforcement policies. For the most part, these States adopt standards that are identical to Federal OSHA. However, some States have adopted different standards applicable to this topic or may have different enforcement policies.

General Industry (29 CFR 1910)

Shipyard Employment (29 CFR 1915)

  • 1915 Subpart K, Portable, unfired pressure vessels, drums and containers, other than ship's equipment

    • 1915.172, Portable air receivers and other unfired pressure vessels
    • 1915.173, Drums and containers

Construction Industry (29 CFR 1926)

National Consensus

Note: These are NOT OSHA regulations. However, they do provide guidance from their originating organizations related to worker protection, and may be referenced by OSHA inspectors for informational purposes.

American Society of Mechanical Engineers (ASME)

  • 2004 Boiler and Pressure Vessel Code

American Petroleum Institute (API)

  • 510, Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration. 9th ed. (2006, June 1).

  • 572, Inspection of Pressure Vessels. (2009, November).

  • 910, Digest of State Boiler, Pressure Vessel, Piping & Aboveground Storage Tank Rules and Regulations. 8th ed. (1997, November 1).

  • 620, Design and Construction of Large, Welded, Low-Pressure Storage Tanks. 11th ed. (2008, February 1).

  • 941, Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants. 6th ed. (2004, February).

  • 945, Avoiding Environmental Cracking in Amine Units. 3rd ed. (2003, June).

Hazard Recognition

The following references provide information to help with the recognition and control of pressure vessel hazards.

Recognition

Evaluation

  • "Pressure Testing." Volume II: Health & Safety -- Controls and Hazards; Environmental Safety and Health Manual. Lawrence Livermore National Laboratory (LLNL).

Control

  • "Pressure Vessel and System Design." Volume II: Health & Safety -- Controls and Hazards; Environmental Safety and Health Manual. Lawrence Livermore National Laboratory (LLNL).

Additional Information

Related Safety and Health Topics Pages

Training

Other Resources

  • National Board Series Technical Articles. National Board of Boiler and Pressure Vessel Inspectors (NBBI).  
  • محصولات و خدمات گروه صنعتی پارسه سازه

    .

    برای کسب اطلاعات بیشتر در خصوص هر یک از محصولات بر روی تصویر آن کلیک کنید

    طراحی و ساخت اسکلت فلزی برج ها و ساختمان های عظیم جوشی و پیچ و مهره ای

    طراحی و ساخت انواع استراکچر فلزی و پلت فرم بخصوص صنایع سیمان ، پتروشیمی ، نیروگاهی و ....

    طراحی و ساخت انواع پل فلزی سبک و سنگین

    طراحی و ساخت انواع پل عابر پیاده

    طراحی و ساخت انواع سوله سنگین و سبک با سقف شیب دار و قوسی

    سازنده تجهیزات ، قطعات و سازه های فولادی صنایع سیمان

    طراحی و ساخت انواع مخازن فشار قوی مخصوصا صنایع پتروشیمی و سیمان و انواع سایر مخازن

    طراحی و ساخت انواع مخازن استیل مخصوصا صنایع غذایی

    طراحی و ساخت انواع اتاق بار کمپرسی ، کامیون و تریلی و انواع اتاق فلزی

    طراحی ، ساخت و نصب جرثقیل کارگاهی از 5 تا 100 تن

    کانکس اداری انواع کانکس در ابعاد مختلف

    کانکس دو طبقه ، کانکس سه طبقه کانکس های دو طبقه و سه طبقه با طراحی انحصاری

    تجهیز کارگاه ، تجهیز کمپ تجهیز کارگاه های پیمانکاری

    خانه پیش ساخته با ساندویچ پانل خانه و دفتر کار پیش ساخته ساندویچ پانلی ، تجهیز کارگاه ساندویچ پانلی

    کانکس های مخصوص کمپ با محوطه مسقف

    طراحی و ساخت انواع برجک نگهبانی طراحی و ساخت انواع برجک نگهبانی

    طراحی و ساخت پله فلزی ، پله فرار ، پله اضطراری طراحی و ساخت انواع پله فلزی ، پله فرار ، پله اضطراری

    طراحی ، ساخت و نصب طبقات کارگاهی ( پلت فرم ) طراحی و ساخت انواع پلت فرم و طبقات کارگاهی

    طراحی ، ساخت و نصب پارکینگ و سایبان طراحی و ساخت انواع پارکینگ ، ایستگاه ، سقف سبک

    ستون ، بیلبورد ، دکل ، پایه آنتن طراحی و ساخت انواع ستون ، پایه آنتن ، دکل ، سکو ، بیلبورد

    طراحی و ساختانواع رمپ پرتابل پیش ساخته طراحی و ساخت انواع رمپ پیش ساخته

    طراحی و ساخت پل پرتابل پیش ساخته طراحی و ساخت انواع پل پیش ساخته

    اجرای پوشش سقف انواع سوله و سازه اجرای پوشش سقف انواع سوله و سازه

     

    برای توضیحات بیشتر با شماره تلفن زیر تماس بگیرید:

    09126604171

    09380213985

    Alireza.shahbazkia@gmail.com